basque digital innovation HUB logo
Volver a la búsqueda

DENOMINACIÓN

Banco de ensayos para medida de soldabilidad de materiales metálicos con tecnologías de fusión de material para procesos de soldadura con fusión (procesos al arco, soldadura láser, y/o soldadura por haz de electrones)

DESCRIPCIÓN

The test bench for weldability evaluation of metallic materials analyses hot cracking susceptibility during welding (fusion welding processes: arc, laser..). The test consists in the application of a bending deformation during welding. Different strain levels are applied by interchangeable die blocks to evaluate the solidification and HAZ liquation cracking susceptibility of the material along the length of the weld. Promoted cracks are measured by LOM. The total crack length (TCL) is related to the susceptibility to hot cracking.

The test bench was designed and manufactured by IK4-LORTEK and it complies with the general requirements set by ISO/TR 17641-3 “Destructive tests on welds in metallic materials-Hot cracking tests for weldments-Arc welding processes-Part 3: Externally loaded tests”.
The system works both with arc welding and laser beam welding equipment and different testing parameters (stroke rate, welding rate, synchronization set-ups…) can be selected. The Varestraint system integrates a compact tooling for application of bending deformation during test. It is composed by a mandrel and two rolls which rotate without restraint.
The Varestraint test bench at IK4-LORTEK is also composed by a hydraulic system controlled by a high precision servovalve to perform an accurate movement of the cylinder. The hydraulic system has been designed to ensure the required force, dynamics and repeatability in terms of stroke rates.

Concerning the mechanical components designed by IK4-LORTEK, these comprise:
- Support bench or stand
- Hydraulic cylinder with linear transductor (5 Ton maximum load, 50 mm maximum stroke)
- Die blocks with different radius (160, 80, 40, 27 and 20 mm)
- Sample positioning and clamping system (compact tooling) composed by two rotating rollers contacting with support plates.

EQUIPOS Y COMPONENTES MÁS DESTACADOS

Banco de ensayos para análisis de soldabilidad +

Varestraint test bench, equipped with:

- Main Control cabinet (main experimental parameters control: strain, time...)

- Different equipment for motion: ABB robot, robot ASEA IRB 2000, Robots FANUC 1 and FANUC 2 and a large KUKA gantry

- Different energy sources: laser (Disco laser 5kW, Laser Nd-YAG 3 kW, diode laser 3kW, fiber laser IPG 1kW) or electric arc (processes: PAW, TIG, MIG/MAG)

SERVICIOS OFRECIDOS POR EL ACTIVO

services book icon
588

Analysis of the improvement of weldability

services book icon
589

Analysis of the weldability of materials manufactured with different routes

services book icon
590

Analysis of the weldability of materials treated in different conditions

ENTIDAD QUE GESTIONA EL ACTIVO

LORTEK S.C.

,

Persona de contacto:

NIEVES RODRÍGUEZ

imprimir

Pídenos tu propuesta 4.0

Otros activos relacionados

Pide tu propuesta

Deja que te conozcamos mejor. Contesta unas preguntas y tu enlace 4.0 te
presentará la mejor propuesta para incorporar soluciones 4.0

  • OrdenNecesidades 
    numera del 1 al 3 siendo el 1 tu mayor prioridad
  • SPRI-Agencia Vasca de Desarrollo Empresarial (www.spri.eus), como responsable del tratamiento y con quien puede contactar mediante el mail lopd@spri.eus recoge sus datos personales con la finalidad de prestarle el adecuado servicio de atención en relación a nuestros servicios y programas de ayudas. Para conocer en detalle los derechos que le asisten y disponer de información ampliada respecto a las finalidades y legitimación del tratamiento puede dirigirse a https://www.spri.eus/es/politica-de-privacidad/ "