Systems for mechanical properties and microstructure determination by magnetic non-destructive measurements
Device to measure magnetic properties, which allows obtaining an indirect characterisation of mechanical properties or the microstructure of ferromagnetic parts.
Non-destructive testing device useful to detect production defects as variations in the surface hardness, residual stresses, hardened layer or grinding burns.
Self-developed magnetic properties measurement system that can work with commercial or customised sensors depending on the geometry and characteristics of the part to be tested. This system can be used for manual measurements or automatised measurements by means of a robot using our customised compliant systems. Mechanical properties values of the parts can be obtained by calibration and measurement of magnetic properties.
Eddy current portable device. GE Inspection Technologies – Vector 2d with several probes.
Own development. Various sensors can be coupled to gears, spindle shafts, bearings, camshafts - technology for specific development that can be coupled to various component geometries.
Self-developed. System for measuring magnetic properties in steels, magnetic hysteresis cycles (from 0.1 to 80 Hz), determination of magnetic induction at different H magnetic field levels
Analysis of mechanical properties by indirect measurement of magnetic properties
Development of grinding burn detection systems (by Magnetic Barkahusen noise)
Magnetic non-destructive systems to estimate residual stresses along the depth
Measurement of magnetic properties at several frequencies
Magnetic nondestructive systems to determine the thickness of the hardened layer (case depth) in surface‐hardened components
Let us get to know you better. Answer some questions and your 4.0
link will present you with the best proposal for incorporating 4.0 solutions