3D Printing Filament Manufacturing Unit
Manufacturing unit and adaptation of thermoplastic compounds for 3D printing, formats: 1.75 mm and 2.85 mm diameter filaments and pellets. The Unit has capacity for the elaboration of experimental batches between 200 grams and 20 Kg / day, of rigid and elastomeric thermoplastic, reinforced composites, nanocomposites, biomaterials and high temperature thermoplastics (up to 380 ºC of fusion temperature).
Industrial fused filament printer 3NTR A2 with building heated chamber at 80 ºC degrees and dimensions of 620 x 355 x 500 mm, refrigerated extrusion head of 3 hotends (410ºC), and heated construction platform up to 135ºC.
Single extruder Haake Rheocord-Rheomex of 19 mm diameter with Haake Polylab torque rheometer, and nozzle for 1.75mm filament.
Pilot extrusion line with nozzles to make filaments of 1.75 and 2.85 mm diameter and pellets, with a twin-screw extruder Leisbtriz Mico 27 GL, and a single-screw extruder Iqap Lap of 30 mm, Brabender gravimetric feeders, cooling system with water bath or air blow, and winding system.
GALA LPU submerged granulator system with maximum granulation flow rate of 20Kg/h and 315 ºC of maximum service temperature of the perforated plate.
Micrompounder DSM Explore of double conical screw, with mixing chamber volumen of 15 cm3, working temperature range between 21ºC and 400ºC, shear rate between 1 and 250 rpms.
Development of new 3D printing polymeric materials
Evaluation of emissions toxicity
Design and product development through FFF / FDM technology
Sustainability and recyclability evaluation
Optimization of process parameters
Let us get to know you better. Answer some questions and your 4.0
link will present you with the best proposal for incorporating 4.0 solutions