Bilaketa
Itzuli bilaketara
IZENA

Banco de ensayos para medida de soldabilidad de materiales metálicos con tecnologías de fusión de material para procesos de soldadura con fusión (procesos al arco, soldadura láser, y/o soldadura por haz de electrones)

AZALPENA

The test bench for weldability evaluation of metallic materials analyses hot cracking susceptibility during welding (fusion welding processes: arc, laser..). The test consists in the application of a bending deformation during welding. Different strain levels are applied by interchangeable die blocks to evaluate the solidification and HAZ liquation cracking susceptibility of the material along the length of the weld. Promoted cracks are measured by LOM. The total crack length (TCL) is related to the susceptibility to hot cracking.

The test bench was designed and manufactured by IK4-LORTEK and it complies with the general requirements set by ISO/TR 17641-3 “Destructive tests on welds in metallic materials-Hot cracking tests for weldments-Arc welding processes-Part 3: Externally loaded tests”.
The system works both with arc welding and laser beam welding equipment and different testing parameters (stroke rate, welding rate, synchronization set-ups…) can be selected. The Varestraint system integrates a compact tooling for application of bending deformation during test. It is composed by a mandrel and two rolls which rotate without restraint.
The Varestraint test bench at IK4-LORTEK is also composed by a hydraulic system controlled by a high precision servovalve to perform an accurate movement of the cylinder. The hydraulic system has been designed to ensure the required force, dynamics and repeatability in terms of stroke rates.

Concerning the mechanical components designed by IK4-LORTEK, these comprise:
- Support bench or stand
- Hydraulic cylinder with linear transductor (5 Ton maximum load, 50 mm maximum stroke)
- Die blocks with different radius (160, 80, 40, 27 and 20 mm)
- Sample positioning and clamping system (compact tooling) composed by two rotating rollers contacting with support plates.

EKIPO ETA OSAGAI GARRANTZITSUENAK

AKTIBOAK ESKAINTZEN DITUEN ZERBITZUAK

services book icon
588

Analysis of the improvement of weldability

services book icon
589

Analysis of the weldability of materials manufact

services book icon
590

Analysis of the weldability of materials treated

AKTIBOA KUDEATZEN DUEN ERAKUNDEA

LORTEK S.C.

Harremanetarako pertsona: NIEVES RODRÍGUEZ

Erlazionatutako beste aktibo batzuk

Hitz egiguzu zure beharraz

Utziguzu zu hobeto ezagutzen. Zure enpresaren produkzio-sistemaren eraginkortasuna hobetuko duten teknologia adimendunak eta material aurreratuak inplementatu nahi badituzu balio erantsi handiagoko soluzioak eskaintzeko, bete formulario hau.

Scroll To Top